Multi Circuit Intrinsically Safe Zener Barrier 6 x 5V and 6 x 12V

TECHNOLOGY

My Account

3.142.124.119

» Products «	Solutions	Support	My Account	Resellers	News	About	Contact
							Online Enquiry

Price:

€ 274.42
UK£ 171.51
US$ 295.00

Key Features:

Six channels Zener Barrier 0 .. 5 volts AC or +/- 5 volts DC.
Six channels Zener Barrier 0 .. 12 volts AC or +/- 12 volts DC
Low capacitance of approximately 2nF per 5 V channel, 1.5 nF per 12 V channel.
Chassis Mountable (Standoff).
DIN Rail mountable (SnapOn).
Low serial resistance.

Technical Specifications:

A Channels:	+/- 5 volts DC or 5 volts AC
B Channels:	+/- 12 volts DC or 12 volts AC
A Channels Serial Resistance:	approximately 30 Ohms
B Channels Serial Resistance:	approximately 30 Ohms
Max DC current A Channels:	100 mA = 3 volt drop over barrier
Max DC current B Channels:	100 mA = 3 volt drop over barrier
Compliance with: Dimensions:	UL 913 - Listed: E309548 11.31" x 3.00" (288x76mm)
Environmental:	Operating temperature -40 deg. C to +70 deg. C

12-circuit low capacity intrinsically safe zener barrier Printed Circuit Board with six 5V barriers and six 12V barriers.

This unique new zener barrier complies to UL-962 for intrinsically safe zener barriers and features a low serial resistance of 100 ohms for the 5 volt signal barriers and 200 ohms for the 12 volt signal barriers.

The product is ideal for petrol and gas pumps or other equipment where part of the electronics are located in the hazardous area.

The zener barrier's design has particularly low capacitance to allow high frequency signals to pass with as little distortion as possible.

The device may be used with Ringdale's rotary shaft encoder. The shaft encoder is often used in gas pumps to measure the volume of gas pumped.

Also safety switches and high / low level switches can be fed back through the barrier to the pump controller.

Manufacturers of Gas Pumps often want the flexibility of extra channels for future extension of product features.

The product can be mounted on stand-offs [05-15400000] or is supplied in a SnapOn ABS plastic carrier fitting a DIN rail [06-15400001].

This product is more cost effective than using a number of single channel zener modules.

Supplemental information relevant to the design of intrinsically safe systems click here

Part Numbers:
05-15400000
05-15400001, all 12 circuits at 5 VDC

Caution! All specifications published herein are subject to change without notice. See website for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale.com for Terms and Condtions of Sale and Service.

Printable View

Make an inquiry

email a colleague

Back

Select your datasheet language:
Deutsch	English	Francais	Portugues	Espanol

Sign up for e-mail updates:

Ringdale Inc. | Registered Office: 870 CR-156, Granger, Texas 76530